50 years of stand building
Eldee Expo Experts. The full-service stand builder
Exhibition stand builder
Brussels Expo
We help you make your trade show a success
Looking for a stand builder at Brussels Expo? Eldee Expo Experts designs and builds exhibition stands at the Heysel site in Brussels, for shows such as Batibouw and Busworld. We work from our own workshop in the Netherlands with our own crew and trucks, and you have one project manager throughout. Since 1976 we have completed more than 5,500 projects.
Brussels Expo at a glance
| Address | Place de Belgique 1, 1020 Brussels (Heysel), Belgium |
| Halls | 12 palaces |
| Exhibition space | approx. 115,000 m² |
| Standard stand height | 2.50 m; higher with an approved design, often up to 4.50 or 5.50 m |
| Fire class for wall decoration | A2 (Belgian standard) |
| Public transport | metro Heysel, close to the Brussels ring road |
Building at Brussels Expo
The standard height at Brussels Expo is 2.50 metres for partition walls and fixed stand parts. Higher builds need an approved design with all dimensions. Many shows allow 4.50 or 5.50 metres, depending on the stand's location in the palace. Rear walls above 2.50 metres must be finished by a set time before opening; otherwise the organizer finishes them at your expense.
A two-storey stand is inspected in advance and on site by an external inspection body. An upper deck open to the public must carry 500 kg/m² on top of its own weight, a private deck 350 kg/m². Railings must be at least 110 cm high.
Belgium uses its own fire classes. Wall decoration must meet class A2 (Euroclass C-s3,d1), ceilings and velums class A1. You must be able to show a certificate on request. Our standard materials meet these requirements.
Dutch materials often carry only a Euroclass certificate. We make sure you can show proof of the Belgian class on site. Mention in your briefing whether you want to build above 2.50 metres, and we submit the design in time.
Build-up, dismantling and rigging
Build-up and dismantling times, and the deadlines for designs and orders, are in your show's technical information. Brussels is within a day's drive of our workshop, so we deliver directly with our own trucks, without transshipment.
Stands must be self-supporting by default. To suspend anything, apply in time to Brussels Expo (suspensions@brussels-expo.com) with the location, height and load per point. Only Brussels Expo's technician installs suspension points, and an external body checks the plan and the installation.
You order electricity, water and internet in the organizer's webshop. We track those deadlines and prepare the orders for you.
Always stand out, wherever you exhibit, with a stand by Eldee.
Trade shows at Brussels Expo where we build
Heysel mainly hosts construction, mobility and consumer shows. A selection:
Construction
Batibouw
Mobility
Busworld · European Motor Show Brussels
Furniture and interiors
Furniture Fair Brussels
Food
Salon de l'Alimentation
Is your show not listed? We build at every show in Brussels.
Also nearby: Kortrijk Xpo
See our other venues.
What we arrange at Brussels Expo
For Brussels we submit the fully dimensioned design if you want to build above 2.50 metres, request suspension points from suspensions@brussels-expo.com and guide the external inspection of a second storey. We make sure rear walls are finished on time, so the organizer does not finish them at your expense. Together with Kortrijk, Brussels is a regular destination for our stand construction in Belgium.
FAQ
Frequently asked questions about stand building at Brussels Expo
How high can your stand be, which fire class applies and how does rigging work? Brussels Expo uses Belgian fire classes and a standard height of 2.50 metres. Below are the answers based on the venue's safety regulations.
Eldee Expo Experts, based in Tricht in the Netherlands, builds exhibition stands at Brussels Expo for shows such as Batibouw and Busworld. We know the Belgian fire classes and the inspection rules at Heysel.
The standard is 2.50 metres. Higher builds need an approved design; many shows allow 4.50 or 5.50 metres, depending on your location in the palace. We submit the fully dimensioned design for you.
Belgium uses its own classes: wall decoration A2 (Euroclass C-s3,d1), ceilings and velums A1, fixed floor coverings A3. You must be able to show a certificate on request. Our materials meet these requirements.
An inspection in advance and on site by an external inspection body. An upper deck open to the public carries 500 kg/m² on top of its own weight, railings are at least 110 cm high and the upper level needs an extra fire extinguisher. We handle the full submission.
Yes, if you apply in time to Brussels Expo. Only Brussels Expo’s technician installs suspension points, and an external body checks the plan and installation. We prepare the plan and submit the request.
Custom stands start at about €400 per m². Floor space, electricity, water and suspension points are paid separately to the organizer or Brussels Expo. Building above 2.50 metres needs an approved design, which we include in the planning.
Exhibiting in Brussels soon?
I'm happy to think along about your stand and your show's rules.
Christie
Management Assistant
Call +31 (0)345 585 600